1Y0-402 Free Questions – Citrix XenApp and XenDesktop 7.15 Assessment, Design and Advanced Configurations V10.02

1Y0-402 Citrix XenApp and XenDesktop 7.15 Assessment, Design and Advanced Configurations is available for Citrix Certified Expert – Virtualization (CCE – V) certification. Based on the feedback of our customers, the old version has been outdate, so we updated 1Y0-402 exam questions to V10.02 to help you complete the Citrix CCE-V Certification 1Y0-402 exam smoothly. Citrix 1Y0-402 exam questions V10.02 comes with 128 practice questions and answers. You will be required to read all of them carefully and throughly to make sure you can pass 1Y0-402 real exam smoothly.

1Y0-402 Free Questions – Citrix XenApp and XenDesktop 7.15 Assessment, Design and Advanced Configurations V10.02

1. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. Currently, the environment is configured with two locations with identical XenDesktop Sites. Each Site has two Delivery Controllers, two StoreFront servers, and one NetScaler high availability pair. The same applications have been published from both Sites for all the users. Two Zones (Zone A and Zone B) are configured in each Site with one Controller in each zone. The Microsoft Exchange server is only accessible from Virtual Delivery Agent (VDA) machines in Zone A in each Site.

The following access requirements have been identified:

– Users should have a single URL when accessing resources from different Sites.

– Users should always connect to the datacenter closest to their location.

– Applications added to Favorites within Citrix Receiver should be retained when accessed from different Sites.

– Launched applications and desktops should always connect through a local NetScaler.

– No duplication of applications published from different Sites.

– Microsoft Outlook should always launch in Zone A.

The architect should recommend configuring Optimal Gateway routing on ___________across both locations to ensure that users connect through a local NetScaler. (Choose the correct option to complete the sentence.)

 
 
 
 

2. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. While designing Universal Print server (UPS) for the customer, the architect is asked to ensure that the UPS design can handle 500 simultaneous print jobs per minute.

What must the architect deploy to support the load estimated by the customer?

 
 
 
 
 
 

3. Scenario: A Citrix Architect is designing an environment for a large company.

The company has identified the following user groups and requirements.

– Product Managers – Typically, they work from inside the company network but are able to work from home. They need to use a variety of standard productivity and web-based SaaS applications.

– Field Sales Engineers – They frequently work with mobile devices and tend to access the environment externally. They need access to sales tools and the front-end of the customer database.

– Web Developers – Internal and remote workers who use specialized hardware with a graphics card to handle resource-intensive applications.

Which FlexCast model should the architect assign to Web Developers?

 
 
 
 

4. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.

The architect has identified printing requirements for certain user groups and locations, as shown in the Exhibit.

Click the Exhibit button to view the requirements.

Currently, no printer settings or policies have been configured, and as such, the environment is using default settings. Universal Print Server will NOT be used in this design.

Which two settings should the architect configure to allow the Executives group to achieve the desired print behavior and to ensure their print jobs are optimally routed? (Choose two.)

 
 
 
 
 
 
 

5. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.

The following design requirements have been identified:

– External Partner users should be denied access to published resources unless connecting from a corporate laptop running up-to-date antivirus software.

– External users and partners authenticate using Two-Factor authentication.

– External employees are logged off Citrix Receiver for Web after 10 minutes of inactivity.

– Clipboard mapping is enabled for external engineering users.

– Once authenticated to a company device, internal users do NOT authenticate a second time to access published apps and desktops.

Later in the Assess phase, the architect creates the Access Matrix shown in the Exhibit.

Click the Exhibit button to view the Access Matrix.

During the quality assurance review, the architect determines that one of the user groups does NOT align with the design requirements.

Which user group should the architect modify to match the design requirements identified?

 
 
 
 
 

6. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.

The architect has determined the user groups and FlexCast model listed in the Exhibit during the high-level design.

Click the Exhibit button to view the user group and FlexCast model details.

Which graphics protocol should the architect select for the highlighted group in the Exhibit?

 
 
 
 

7. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The architect has identified the requirements, based on the assessment and early stages of the design.

Click the Exhibit button to view the requirements.

Additionally, the IT team has identified the following general requirements:

– The provisioning strategy should be compatible with the planned design decisions.

– The provisioning strategy should minimize the steps required to perform image and application updates.

Which three follow-up questions should the architect ask about this environment, based on the planned design decisions? (Choose three.)

 
 
 
 
 

8. A Citrix Architect needs to conduct a capabilities assessment for an organization that wants to design and build a new XenApp and XenDesktop environment.

Which four capabilities will directly influence whether the existing Citrix administrative team will have the capacity to support the new environment? (Choose four.)

 
 
 
 
 
 
 

9. Scenario: A Citrix Architect must complete a XenApp and XenDesktop security assessment. After examining the network topology for the hypervisor hosts supporting the Virtual Delivery Agent (VDA) machines, the architect finds that some of the network connections are NOT following leading security practices.

Click the Exhibit button to view a high-level diagram which shows the connectivity between various components.

Which three of the labeled areas of the diagram represent connections which are NOT following Citrix leading security practices? (Choose three.)

 
 
 
 
 
 
 

10. Scenario: A Citrix Architect needs to redesign an existing XenApp and XenDesktop environment to use Machine Creation Services (MCS). During the design discussions, the locations for the MCS-provisioned thin clone machine disks are proposed as shown in the Exhibit.

Click the Exhibit button to view the details.

Which potential concern should the architect address with the customer before proceeding with this configuration? (Choose two.)

 
 
 
 
 

11. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.

The architect has identified the User Layer requirements, as shown in the Exhibit.

Click the Exhibit button to view the requirements.

Additionally, management at the organization has identified the following general Access Layer requirements:

– A multi-factor authentication method is required for any connections to the XenApp and XenDesktop environment originating from outside the corporate network.

– External connections must be authenticated by a NetScaler Gateway virtual server located in a DMZ network.

– Internal connection traffic should NOT leave the internal corporate network.

Which two authentication methods should the architect use for the Contractors group? (Choose two.)

 
 
 
 
 
 

12. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.

While deploying Optimal HDX Routing for the customer, the architect makes the following configurations:

– Authentication Gateway – AuthGW C Logon.workspace.com – Authentication only

– New York Gateway – NYCGW C Nycgw.workspace.com – HDX Routing only

– San Francisco Gateway – SFOGW C Sfogw.workspace.com – HDX Routing only

Click the Exhibit button to view further details about the configuration.

Upon investigation of the load on the NetScalers, the architect determines that both internal and external HDX traffic flow through the NetScaler Gateways and the NetScalers are running at capacity.

Which PowerShell commandlet and parameter can help the architect address this issue until more NetScaler resources are procured?

 
 
 
 

13. Scenario: A Citrix Architect needs to design a multi-datacenter XenApp and XenDesktop environment that will use Provisioning Services (PVS) to manage Virtual Delivery Agent (VDA) machine images. Each datacenter will have a separate Provisioning Services farm. During the design discussions, the architect creates a diagram to depict the way vDisk files will be replicated between PVS farms, based on the available storage for the vDisk Stores.

Click the Exhibit button to view the diagram.

Overall, the customer has identified the following objectives for the image replication process:

– Minimize the administrative time required to replicate images between farms

– Must be usable by PVS farm administrators based on native tools

– Minimize network traffic between datacenters

Which method should the architect use to replicate the vDisk files between datacenters?

 
 
 
 
 

14. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment for a financial services company.

During the project kickoff meeting, the organization states the following business priorities:

“Overall, we want a robust solution which ensures that users can access their resources at any time, even if our primary datacenter experiences an outage. Our employees will need to access their resources from both inside and outside our corporate network, but we need to ensure that we enable this in a secure manner and protect our sensitive data.”

Which four design decisions align with the organization’s stated business drivers? (Choose four.)

 
 
 
 
 
 
 

15. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.

The table in the Exhibit lists details about the requirements of the current user groups and their Virtual Delivery Agent (VDA) machine workloads.

Click the Exhibit button to view the table.

The architect should scale the hardware used to host the VMs for User Group 1 to ______ cores. (Choose the correct option to complete the sentence.)

 
 
 
 
 

16. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The architect has identified the Resource Layer requirements shown in the Exhibit.

Click the Exhibit button to view the requirements.

Additionally, management at the organization has identified the following general Resource Layer requirements:

– The profile solution should be centrally managed.

– The profile solution should minimize logon and logoff times as much as possible.

– User groups do NOT need to use the same profile type.

– Citrix Director should be used for monitoring profiles.

Which profile type should the architect use for the Executives group?

 
 
 
 

17. Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The architect has identified the Resource Layer requirements shown in the Exhibit.

Click the Exhibit button to view the requirements.

Which feature of Citrix Profile Management could help the architect address the Graphic Designers group requirements?

 
 
 
 

18. Scenario: While assessing the User Layer, a Citrix Architect finds that most of the internal users connect using corporate-owned laptops, desktop devices, and thin clients. Many of these laptops and desktop devices are running Windows 10, while the remainder of the machines are running Windows 7 and are in the process of being migrated to Windows 10. Some users also connect using personal devices which have Receiver Desktop Lock installed.

Currently, Citrix Receiver is manually installed on any endpoint device added to the company. All these devices use Citrix Receiver version 4.8 and above. The IT team is planning to automate a process to update all the devices with the latest version of Citrix Receiver and to automate another process for automatic installation of Citrix Receiver without incurring extra costs and maintenance.

During the initial testing of the Citrix Receiver Auto-Update feature, the architect observed that the Citrix Receiver Auto-Update feature does NOT work on some of the machines.

Which two reasons could be causing this issue? (Choose two.)

 
 
 
 

19. Scenario: A Citrix Architect needs to design a multi-datacenter XenApp and XenDesktop environment that will use Provisioning Services (PVS) to manage Virtual Delivery Agent (VDA) machine images. Each datacenter will have a separate Provisioning Services farm. During the design discussions, the architect creates a diagram to depict the way vDisk files will be replicated between PVS farms, based on the available storage for the vDisk Stores.

Click the Exhibit button to view the diagram.

Overall, the customer has identified the following objectives for the image replication process:

– Minimize the administrative time required to replicate images between farms

– Must be usable by storage administrators without PVS farm administrative permissions

– Utilize pre-existing infrastructure and processes where possible

Which method should the architect use to replicate the vDisk files between datacenters?

 
 
 
 
 

20. Scenario: A Citrix Architect is designing a XenApp and XenDesktop environment and needs to design machine catalogs and Delivery Groups. Users should only be able to access their assigned resources.

Click on the Exhibit button to view the design requirements.

What is the appropriate design using the minimum number of machine catalogs and Delivery Groups, based on the requirements in the Exhibit?

 
 
 
 

CCP-V 1Y0-312 Practice Test Questions - Citrix Virtual Apps and Desktops 7 Advanced Administration
1Y0-204 Free Questions - Citrix Virtual Apps and Desktops 7 Administration V8.02

Leave a Reply

Your email address will not be published. Required fields are marked *