300-370 Free Questions – Troubleshooting Cisco Wireless Enterprise Networks

Troubleshooting Cisco Wireless Enterprise Networks (WITSHOOT) exam (300-370) is a 90-minute, 60-70 question assessment that is associated with the CCNP Wireless certification. This exam tests a candidate’s knowledge of troubleshooting and optimizing Enterprise wireless infrastructure and related services plus the tools and methodologies needed to identify and resolve client connectivity, performance, and RF issues.

1.0 Troubleshooting Methodology 10%
2.0 Troubleshoot AP Joining Issues 15%
3.0 Troubleshoot Client Connectivity Issues 20%
4.0 Identify and Locate RF Interferences 13%
5.0 Troubleshoot Client Performance Issues 17%
6.0 Identify Common Wired Infrastructure Issues Based on the Output From Common Troubleshooting Tools 15%
7.0 Troubleshoot WLC and AP High Availability Issues 10%

You can practice in the following 300-370 Free Questions collected from Passquestion, it is the latest version updated on Apr.27th. if you practice well in all 300-370 questions and answers, you will surely pass Troubleshooting Cisco Wireless Enterprise Networks exam.

300-370 Free Questions – Troubleshooting Cisco Wireless Enterprise Networks

1. A company consists of two adjacent buildings, each with its own Cisco 5508 Wireless Controller with APs joined to the controller in the building. The two controllers are configured identically except for interface IP addresses. Only one SSID is being used in both buildings. The clients in building A are not experiencing any connectivity issues, but (he clients in building B report poor connections An engineer performs a site survey and finds co-channel interference, yet discovers mac Transmit Power Control was never performed on the APs and that Radio Resource Management is not functioning like it does in building A Furthermore, the controllers are in the same RF group and controller A is elected RF leader.

Which action will improve client connections in building B?


2. You have successfully configured HA and SSO using two Cisco 5508 Wireless LAN Controllers. You are able to access the Active Primary WLC but are unable to access the Secondary Standby WLC.

Which two methods will allow you to access the standby unit? (Choose two.)


3. While reviewing CleanAir data in Cisco Prime Infrastructure, an engineer notices that a wideband jammer is not sending its Interferer Security Trap correctly. The engineer determines that the default seventy level has been changed.

Which value does the engineer select to reset the seventy level to its factory setting?


4. Refer to the exhibit.

An engineer is troubleshooting non-802 11 interference and observes this output.

Which type of interference signatures can be identified?


5. Refer to the exhibit.

An engineer is troubleshooting non-802.11 interference and observes the shown output.

Which interference signature is the most harmful to Wi-Fi?


6. An engineer is deploying a wireless infrastructure and must use Layer 2 discovery for access point association.

Which configuration meets this requirement?


7. In a cisco OfficeExtend environment, which encryption type n und between the access point and the mass LAW controller?


8. Which visual cue accurately describes a characteristic of the zone of impact displayed in Cisco Prime Infrastructure?


9. Refer to the exhibit.

An engineer is troubleshooting access point placement issues and suspects that poor placement is causing connectivity issues.

When running the show client detail <mac> command, the engineer notices this output.

Which option indicates poor access point placement?


10. A wireless engineer is unable to join lightweight access points to the Cisco Wireless Controller.

The access points receive ip addresses from a DHCP pool configured on the core switch.

Which action must be taken to resolve the issue?


CCNP Collaboration 300-075 CIPTV2 Exam Free Questions
210-455 Free Questions - Introducing Cisco Cloud Administration

Leave a Reply

Your email address will not be published. Required fields are marked *