70-743 Free Questions – Microsoft Upgrading Your Skills to MCSA: Windows Server 2016

There are a lot of sites provide the 70-743 Free Questions for you . Passquestion is only website which can provide you Microsoft 70-743 exam certification with high quality. In the guidance and help of Passquestion, you can through your Microsoft 70-743 exam the first time. The 70-743 Free Questions provided by Passquestion are IT experts use their extensive knowledge and experience manufacturing out . It can help your future in the IT industry to the next level.

70-743 Free Questions – Microsoft Upgrading Your Skills to MCSA: Windows Server 2016

1. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.

Contoso.com has the following configuration:

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.

You need to configure Active Directory to support the planned deployment.

Solution: You upgrade a domain controller to Windows Server 2016.

Does this meet the goal?

Yes

2. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

On Server1, you have the following zone configuration.

You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.

Solution: From Windows PowerShell on Server1, you run the Add-DnsServertrustAnchor cmdlet.

Does this meet the goal?

Yes

3. You have a server named Server1 that runs Windows Server 2016.

You need to configure Server1 as a multitenant RAS Gateway.

What should you install on Server1?

the Network Controller server role

the Remote Access server role

the Data Center Bridging feature

the Network Policy and Access Services server role

4. You have an Active Directory domain that contains several Hyper-V hosts that run Windows Server 2016.

You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies.

Which component must you install for the planned deployment?

the Routing role service

the Canary Network Diagnostics feature

the Network Controller server role

the Data Center Bridging feature

5. You have a virtual machine named VM1 that runs Windows Server 2016. VM1 hosts a service that requires high network throughput.

VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RMDA), the Single Root I/O Virtualization (SR-IOV) interface, Quality of Service (QoS), and Receive Side Scaling (RSS).

You need to ensure that the traffic from VM1 can be processed by multiple networking processors.

Which Windows PowerShell command should you run on the host of VM1?

Set-NetAdapterRss

Set-NetAdapterRdma

Set-NetAdapterSriov

Set-NetAdapterQoS

6. You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.

Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.

You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.

What should you do?

From Hyper-V Manager on Server1, modify the settings of VM1.

From Windows PowerShell on VM1, run theSet-VmNetworkAdapterTeamMapping cmdlet.

From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.

From Windows PowerShell on Server1, run the Set-VmSwitch cmdlet.

7. You have a Nano Server named Nano1.

You deploy several containers to Nano1 that use an image named Image1.

You need to deploy a new container to Nano1 that uses Image1.

What should you run?

the Install-WindowsFeature cmdlet

the docker run command

the docker load command

the Install-NanoServerPackage cmdlet

8. You have a server named Server1 that runs Windows Server 2016.

You plan to deploy Internet Information Services (IIS) in a Windows container.

You need to prepare Server1 for the planned deployment.

Which three actions should you perform? Each correct answer presents part of the solution.

Install the Container feature.

Install Docker

Install the Base Container Images.

Install the Web Server role.

Install the Hyper-V server role.

9. You have a Hyper-V host named Server1 that runs Windows Server 2016.

Server1 has a virtual machine named VM1. VM1 is configured to run the Docker daemon.

On VM1, you have a container network that uses transparent mode.

You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP.

What should you do?

On VM1, run docker network connect.

On Server1, run docker network connect.

On VM1, run Get-VMNetworkAdapter –VMName VM1 | Set-VMNetworkAdapter –MacAddressSpoofing On.

On Server1, run Get-VMNetworkAdapter –VMName VM1 | Set-VMNetworkAdapter – MacAddressSpoofing On.

10. You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1.

You need to configure the Docker daemon to accept connections only on TCP port 64500.

What should you do?

Edit the configuration.json file.

Run the Set-ServiceWindows PowerShell cmdlet.

Edit the daemon.json file.

Modify the routing table on Server1.

11. You have a failover cluster named Cluster1.

A virtual machine named VM1 is a highly available virtual machine that runs on Cluster1. A custom application named App1 runs on VM1.

You need to configure monitoring on VM1. If App1 adds an error entry to the Application event log, VM1 should be automatically rebooted and moved to another cluster node.

Which tool should you use?

Resource Monitor

Failover Cluster Manager

Server Manager

Hyper-V Manager

12. You have a server named Server1 that runs Windows Server 2016.

The disk configuration for Server1 is shown in the exhibit. (Click the Exhibit button.)

You add Server1 to a cluster.

You need to ensure that you can use Disk 1 for Storage Spaces Direct.

What should you do first?

Set Disk 1 to offline.

Convert Partition (E:) to ReFS.

Convert Disk 1 to a dynamic disk.

Delete Partition (E:).

13. Your network contains an Active Directory domain. The domain contains two Hyper-V hosts.

You plan to perform live migrations between the hosts.

You need to ensure that the live migration traffic is authenticated by using Kerberos.

What should you do first?

From Server Manager, install the Host Guardian Service server role on a domain controller.

From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators group.

From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers.

From Server Manager, install the Host Guardian Service server role on both servers.

14. You have an Active Directory domain named Contoso.com. The domain contains servers named Server1, Server2 and Server3 that run Windows Server 2016.

Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. You add a Hyper-V Replica Broker role named Broker1 to Cluster1.

Server3 is a Hyper-V server. A virtual machine named VM1 runs on Server3.

Live Migration is enabled on all three servers and it is configured to use Kerberos authentication only.

You need to ensure that you can perform the migration of VM1 to Server2.

What should you do?

Add the Server3 computer account to the Replicator group on Server1 and Server2.

Modify the Delegation settings on the Server3 computer account.

Modify the Storage Migration settings on Server3.

Modify the Cluster permissions for Cluster1.

15. Your network contains three Hyper-V hosts. You add all of the hosts to a cluster.

You need to create highly available storage spaces that connect to directly attached storage on the hosts.

Which cmdlet should you use?

Update-ClusterVirtualMachineConfiguration

Enable-ClusterStorageSpacesDirect

Set-StoragePool

Add-ClusterDisk

16. Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. Server1 is located in the perimeter network.

You install the Active Directory Federation Services server role on Server1. You create an Active Directory Federation Services (AD FS) farm by using a certificate that has a subject name of sts.contoso.com.

You need to enable certificate authentication from the Internet on Server1.

Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the solution.

389

443

3389

8531

49443

17. Your network contains an Active Directory forest named contoso.com.

You have an Active Directory Federation Services (AD FS) farm. The farm contains a server named Server1 that runs Windows Server 2012 R2.

You add a server named Server2 to the farm. Server2 runs Windows Server 2016.

You remove Server1 from the farm.

You need to ensure that you can use role separation to manage the farm.

Which cmdlet should you run?

Update-AdfsRelyingPartyTrust

Invoke-AdfsFarmBehaviorLevelRaise

Set-AdfsFarmInformation

Set-AdfsProperties

18. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. The servers have the same hardware configuration.

You need to asynchronously replicate volume F: from Server1 to Server2.

What should you do?

Install the Failover Clustering feature and create a new cluster resource group.

Run Set-DfsrServiceConfiguration and specify the –RPCPort parameter.

Run New-SRPartnership and specify the –ReplicationMode parameter.

Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).

19. You have a server named Server1 that runs Windows Server 2016.

The disks on Server1 are configured as shown in the following table:

Windows Server 2016 is installed in C:\Windows.

On which two volumes can you enable data deduplication? Each correct answer presents a complete solution.

20. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a Hyper-V host named Server1 that runs Windows Server 2016. You plan to deploy several shielded virtual machines on Server1.

You deploy a Host Guardian on a new server.

You need to ensure that Server1 can host shielded virtual machines.

What should you do first?

the Mount-VHD cmdlet

the Diskpart command

the Set-VHD cmdlet

the Set-VM cmdlet

the Set-VMHost cmdlet

the Set-VMProcessor cmdlet

the Install-WindowsFeature cmdlet

the Optimize-VHD cmdlet

70-743 Free Questions – Microsoft Upgrading Your Skills to MCSA: Windows Server 2016

70-743 Free Questions – Microsoft Upgrading Your Skills to MCSA: Windows Server 2016

Leave a Reply Cancel reply