Aruba Certified Switching Professional Exam HPE6-A73 Real Questions

1. How js voice traffic prioritized correctly on AOS-CX switches’?

2. Examine the configuration performed on newly deployed AOS-CX switches;

After performing this configuration the administrator notices that the switch ports always remain in the EAP-start state.

What should the administrator do to fix this problem?

3. A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized.

What should be done to fix this issue?

4. Examine the following AOS-CX switch configuration:

Which statement correctly describes what is allowed for traffic entering interface 1/1/3?

5. An administrator in a company of 348 users has a pair of AOS-CX switches with connections to external networks Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.

What is the best way for the administrator to accomplish this?

6. An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities

The campus involves a core as well as multiple access layers.

Which feature should the administrator implement to allow

both VSX’Capable core switches to process traffic sent to the default gateway in the campus VLANs?

7. An administrator has configured the following on an AOS-CX switch:

What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?

8. An administrator wants to track what configuration changes were made on a switch What should the administrator implement to see the configuration changes on an AOS-CX switch?

9. How does PIM build the IP multicast routing table to route traffic between a multicast source and one or more receivers9

10. What is correct regarding rate limiting and egress queue shaping on AOS-CX switches’?

11. Refer to the exhibit.

The ACL configuration defined on Core-1 is as follows:

if telnet was being used which device connection would he permitted and functional in both directions? (Select two }

12. How is NetEdit installed at a customer location?

13. A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes

Which solution should the administrator implement?

14. An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concernedthat when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affectnetwork connectivity especially VoIP calls, in the connected access layer switches.

What should the administrator do on the aggregation layer switches to alleviate this issue?

15. An AOS-CX switch is configured to implement downloadable user roles Examine the AOS-CX switch output:

Access11config i$ show aaa authentication port-access interface ail client-status

Port Access Client Status Details

Based on this output what is the state of the users access’?

16. An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as pnmary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.

What would cause this problem?

17. A network administrator is managing a network that deploys a multicast service. The administrator has multiple streamssuccessfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination addressof 239.0.0 1. However clients who have not joined the stream are receiving it.

What should the administrator do to fix this problem?

18. A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server. The administrator needs to examine the packets over a period of time from their desktop, however, the administrator is not directly connected to the AOS-CX switchinvolved with the traffic flow.

What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch? (Select two)

19. Which statement is correct regarding ACLs and TCAM usage?

20. A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS’CX switches:

radius-server tracking user-name monitor password plaintext arubal23

What is the purpose of this configuration?

21. How js voice traffic prioritized correctly on AOS-CX switches’?

22. Examine the configuration performed on newly deployed AOS-CX switches;

After performing this configuration the administrator notices that the switch ports always remain in the EAP-start state.

What should the administrator do to fix this problem?

23. A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized.

What should be done to fix this issue?

24. Examine the following AOS-CX switch configuration:

Which statement correctly describes what is allowed for traffic entering interface 1/1/3?

25. An administrator in a company of 348 users has a pair of AOS-CX switches with connections to external networks Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.

What is the best way for the administrator to accomplish this?

26. An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities

The campus involves a core as well as multiple access layers.

Which feature should the administrator implement to allow

both VSX’Capable core switches to process traffic sent to the default gateway in the campus VLANs?

27. An administrator has configured the following on an AOS-CX switch:

What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?

28. An administrator wants to track what configuration changes were made on a switch What should the administrator implement to see the configuration changes on an AOS-CX switch?

29. How does PIM build the IP multicast routing table to route traffic between a multicast source and one or more receivers9

30. What is correct regarding rate limiting and egress queue shaping on AOS-CX switches’?

31. Refer to the exhibit.

The ACL configuration defined on Core-1 is as follows:

if telnet was being used which device connection would he permitted and functional in both directions? (Select two }

32. How is NetEdit installed at a customer location?

33. A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes

Which solution should the administrator implement?

34. An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concernedthat when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affectnetwork connectivity especially VoIP calls, in the connected access layer switches.

What should the administrator do on the aggregation layer switches to alleviate this issue?

35. An AOS-CX switch is configured to implement downloadable user roles Examine the AOS-CX switch output:

Access11config i$ show aaa authentication port-access interface ail client-status

Port Access Client Status Details

Based on this output what is the state of the users access’?