CCT Data Center 010-151 DCTECH Practice Test Questions

1. Which method is a TCP/IP-based protocol for establishing and managing connections between IP-based storage devices, hosts, and clients?

FCIP

iFCP

iSCSI

FCoE

2. Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP?

routing

tunneling

handshaking

transporting

3. Which important feature on the front end is provided to the clients by multiple servers that access the same storage devices across the SAN?

recovery

redundancy

resiliency

security

storage

4. The Ethernet specification details several different fiber optic media types.

What is the wire transmission speed for 100BASE-FX Ethernet?

10 Mb/s

100 Mb/s

1000 Mb/s

10000 Mb/s

5. Which fiber optic cable type is used most often with a Subscriber connector?

dual-mode

single-mode

straight-mode

multi-mode

subscriber-mode

6. Which type of connection across the network does a SAN allow for multiple servers to access an unlimited amount of storage devices?

any-to-many

many-to-any

any-to-any

any-to-one

one-to-any

one-to-one

7. What is the wire transmission speed for 100GBASE-ER4 Ethernet?

100 Mb/s

1 Gb/s

10 Gb/s

100 Gb/s

8. Which two statements about PCIe are true? (Choose two.)

The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes.

You can install a PCI Express x8 adapter into an x4 slot.

The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.

The PCIe 1.0 standard doubles the transfer rate compared to PCIe 2.0.

A link that is composed of four lanes is called an x4 link.

9. Which three statements about FCoE are true? (Choose three.)

Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.

Encapsulates Fibre Channel frames into Ethernet frames, which allows them to run alongside traditional IP traffic.

Increases capital costs due to the difficulty to manage.

Consolidates I/O traffic in the data center.

10. Which cable is used to access the command-line interface of a Cisco UCS 6120XP Fabric Interconnects?

KVM cable

console cable

Ethernet cable

SFP+ Ethernet transceiver cable
Answer: B

11. Where do you find the model number of a Cisco MDS 9200 Series chassis?

on the top front of the chassis next to the serial number

on the bottom front of the chassis next to the Cisco logo

on the top front of the chassis next to the Cisco logo

on the bottom front of the chassis next to the serial number

12. How do you find the serial number of a Cisco UCS 5108 Blade Server chassis?

Use the Cisco UCS Admin.

Use the Cisco UCS Application.

Use the Cisco UCS Assistant.

Use the Cisco UCS Manager.
Answer: D

13. What does the system status LED look like when an over temperature or major alarm occurs on the Cisco UCS 6120XP Fabric Interconnect?

Amber

Red

Blinking amber

Blinking red

14. Refer to the exhibit.

Which item does F represent?

HDD 1

TFP Module

SuperCap Module

CPU 2

CMOS Battery
Answer: D

15. Refer to the exhibit.

Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?

A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.

A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.

A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.

A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.

16. Which processor option is supported in the Cisco UCS C420 M3 Server?

up to two Intel Xeon E5-4600 series multicore processors

up to two Intel Xeon E7-4800 series multicore processors

up to four Intel Xeon E5-4600 series multicore processors

two or four Intel Xeon E7-8800 series multicore processors

17. Which two major components does a Cisco Nexus 1000V Series Switch have? (Choose two.)

Virtual Fiber Channel Module

Virtual Ethernet Module

Virtual Supervisor Module

Virtual Memory Controller Module

Virtual Network Module

18. Which Cisco Nexus 5000 Series model supports 1/10G BASE-T ports?

Cisco Nexus 5548P

Cisco Nexus 5548UP

C. Cisco Nexus 5596UP

Cisco Nexus 5596T

19. Which Cisco MDS model supports the most Fibre Channel ports per chassis?

MDS 9513

MDS 9509

MDS 9506

MDS 9250i

20. Refer to the exhibit.

Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?

MDS 9509

MDS 9513

MDS 9710

MDS 9506
Answer: C

CCT Data Center 010-151 DCTECH Practice Test Questions

Leave a Reply Cancel reply