Cisco 350-601 DCCOR Exam Questions Online – CCNP Data Center Core Exam

To start for your 350-601 Implementing and Operating Cisco Data Center Core Technologies (DCCOR), PassQuestion new released Cisco 350-601 DCCOR Exam Questions Online to help you pass CCNP Data Center certification. You can practice in the following free questions.

The Implementing and Operating Cisco Data Center Core Technologies v1.0 (DCCOR 350-601) exam is a 120-minute exam associated with the CCNP Data Center, Cisco Certified Specialist – Data Center Core, and CCIE Data Center certifications. This exam tests a candidate’s knowledge of implementing core data center technologies including network, compute, storage network, automation, and security.

Cisco 350-601 DCCOR Exam Questions Online – CCNP Data Center Core Exam

1. Which virtual MAC address is the default for HSRP version 2 group 10?

 
 
 
 

2. Refer to the exhibit.

Which statement about the ERSPAN configuration in this environment is true?

 
 
 
 

3. Refer to the exhibit.

Which two statements about the routing table of the leaf switch are true? (Choose two.)

 
 
 
 
 

4. Which mroute state is created when Bidirectional PIM is deployed at a site?

 
 
 
 

5. Refer to the exhibit.

Which statement about the default gateway configuration of the vPC is true?

 
 
 
 

6. Refer to the exhibit.

What must be connected to clear the HA NOT READY status?

 
 
 
 

7. A small remote office is set to connect to the regional hub site via NSSA ASBR.

Which type of LSA is sent to the remote office OSPF area?

 
 
 
 

8. The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis.

Which two SPAN characteristics must be considered? (Choose two.)

 
 
 
 
 

9. Refer to the exhibit.

What is configured as a result of running these commands?

 
 
 
 

10. A customer has a requirement to deploy a cloud service and needs to have full control over the underlying OS, data and applications.

Which cloud model meets this requirement?

 
 
 
 

11. What is a feature of NFS?

 
 
 
 

12. Which feature must be enabled to support the use of JSON and XML encoding when a Cisco Nexus 7000 series switch is deployed?

 
 
 
 

13. Which two settings must be configured before enabling a Cisco UCS Manager domain for Cisco Intersight connectivity? (Choose two.)

 
 
 
 
 

14. Which server policy is used to install new Cisco IMC software on a server?

 
 
 
 

15. A host EDG Client wants to talk to a webserver in EGP Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80.

Which statement is true?

 
 
 
 

16. Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot using POAP? (Choose two.)

 
 
 
 
 

17. Refer to the exhibit.

Which type of backup is required to restore a Cisco UCS configuration?

 
 
 
 

18. Which product includes prebuilt templates that can be used to customize fabric deployments?

 
 
 
 

19. What is a characteristic of electronic programmable logic device (EPLD) software upgrades?

 
 
 
 

20. An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric interconnect.

Which backup type must be selected to meet these requirements?

 
 
 
 

21. DRAG DROP

An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch.

Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.

22. An engineer updated firmware on Fabric Interconnects and activates it. However, the endpoint fails to boot from the new firmware image.

What is expected to occur in this case?

 
 
 
 

23. Refer to the exhibit.

Why does the python code for Cisco NX-API print error message?

 
 
 
 

24. DRAG DROP

Drag and drop the characteristics from the left onto the correct storage systems on the right.

25. Which method must a network engineer use to upgrade the BIOS firmware of a Cisco UCS standalone C-Series reck-mount server?

 
 
 
 

26. An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch.

Which utility should be used?

 
 
 
 

27. An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration.

Which configuration is expected to be saved by using this backup type?

 
 
 
 

28. A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic.

Which configuration should be applied after the Physical connection is established?

 
 
 
 

29. Which three firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose three.)

 
 
 
 
 
 

30. A network architect is asked to design and manage geographically distributed data centers across cities and decides to use a Multi-Site Orchestrator deployment.

How many orchestrators should be deployed?

 
 
 
 

31. Refer to the exhibit.

Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)

 
 
 
 
 

32. Refer to the exhibit.

Which command is run from the Guest Shell to set the description on the first five interfaces of the Cisco Nexus switch?

 
 
 
 

33. Refer to the exhibit.

Which command needs to be added to the line starling with the "file" keyword to have the generated running-config file with the name ‘fusion-config_’ and current date?

 
 
 
 

34. An engineer must configure RBAC is Cisco UCS Manager in an existing data center environment.

Which two roles can be used to configure LAN Connectivity policies? (Choose two.)

 
 
 
 
 

35. An engineer needs to install a new package on a Cisco Nexus 9000 Series Switch.

What is the impact of running the install commit <filename> command on the switch?

 
 
 
 

36. Refer to the exhibit.

What is the reason the system-fm-vrrp checkpoint was created?

 
 
 
 

37. An engineer needs to Implement a solution that prevents loops from occurring accidentally by connecting a switch to interface Ethemet1/1. The port Is designated to be used tor host connectivity.

What configuration should be implemented?

 
 
 
 

38. DRAG DROP

Refer to the exhibit.

Drag and drop each traffic flow type from the left onto the corresponding number on the right Not all traffic flow types are used

39. Where is the witness deployed in a two-node Cisco HyperFlex Edge deployment?

 
 
 
 

40. Due to a major version change, an engineer must perform a software upgrade on a Cisco Nexus Series switch.

Which two technologies can be implemented to reduce disruptions to the network during the upgrade? (Choose two.)

 
 
 
 
 

41. An engineer configures a storage environment for a customer with high-security standards. The secure environment is configured in vsan 50. The customer wants to maintain a configuration and active databases and prevent unauthorized switches from joining the fabric. Additionally, the switches must prevent rogue devices from connecting to their ports by automatically learning the WWPNs of the ports connected to them for the first time.

Which two configuration sets must be used to meet these requirements? (Chose two.)

 
 
 
 
 

42. DRAG DROP

Drag and drop the steps on the left onto the order that they must be implemented on the right to recover a fabric interconnect when there is no working image on the bootflash.

43. An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge.

What is the result of this action?

 
 
 
 

44. The Cisco Nexus 5600 Series Switch experiences occasional packet drops on interface ethernet 1/16. An engineer wants to implement a SPAN session to investigate the issue further. The network analyzer to which the packets must be directed is located on interface 1/3. The analyzer is limited on disk space available for traffic capture, so the Nexus switch should send only the relevant data.

Which two command sets configure the SPAN session that meets these requirements? (Choose two.)

 
 
 
 
 

45. Refer to the exhibit.

An engineer is configuring a VSAN on the network Which option must be selected to create the VSAN?

 
 
 
 

46. Which statement about monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect is true?

 
 
 
 

47. The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures.

Which configuration applies the changes for module 1 only?

 
 
 
 

48. Refer to the exhibit.

Which backup operation type does not include the Preserve Identities feature?

 
 
 
 

49. A network engineer must determine the cooling requirements for a Cisco UCS C-Series Rack Server. The server with PCIe cards is configured with a fan configuration policy.

Which configuration should be used for the fan policy of the server?

 
 
 
 

50. Refer to the exhibit.

An engineer needs to implement a monitoring session that should meet the following requirements:

• Monitor traffic from leaf to leaf switches on a Cisco ACI network

• Support filtering traffic from Bridge Domain or VRF

Which configuration must be added to meet these requirements?

 
 
 
 

51. Refer to the exhibit.

What is the result of implementing the configuration?

 
 
 
 

52. A customer wants to offload some of its order processing to a public cloud environment. The customer environment is based on Cisco ACI and uses Puppet with containenzed applications. The operations team requires a solution to orchestrate and optimize the cost of the new solution.

Which product must be used to meet these requirements?

 
 
 
 

53. Refer to the Exhibit.

An engineer is connecting a Cisco MDS 9700 series multilayer director to a downstream Cisco Nexus 5672UP switch.

Which command set must be used to complete the configuration?

 
 
 
 

54. Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 7000 series switch that has dual supervisor modules and two I/O modules?

 
 
 
 

55. An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN.

Which method does Cisco recommend to configure the SAN boot?

 
 
 
 

56. An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is named kr2016 needs to be created. The cluster IP address is 10.68.68.68.

Which command set creates this certificate request?

A)

B)

C)

D)

 
 
 
 

57. A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc 1-12 and then for ports fc13-24 for the next 60 seconds. Ports in the range fc4/13-14 were already enabled for analytics.

Which set of commands must be used to meet these requirements?

 
 
 
 

58. What is required for using Ansible with HTTP/HTTPS protocol in a Cisco NX-OS environment?

 
 
 
 

59. Which configuration generates a syslog message when CPU utilization is higher than 60%?

 
 
 
 

60. An engineer must build a lab replica of a Cisco UCS production environment. The file must be imported into a new Cisco UCS cluster using a Cisco UCS manager GUI. The file must be in XML format and be exported from Cisco UCS Manager using encrypted method.

Which two configuration parameters should be selected to meet these requirements? (Choose two.)

 
 
 
 
 

61. DRAG DROP

Refer to the exhibit.

In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:

• R1 must be the active RP.

• R2 must be the backup RP that is used only if R1 is not reachable

Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.

62. Refer to the exhibit.

Which result of running the command is true?

 
 
 
 

63. Refer to the exhibit.

Which statement about the default gateway configuration of the vPC is true?

 
 
 
 

64. An engineer is seeking the most optimal on demand CPU performance while configuring the BIOS settings of UCS C-series rack mount server.

 
 
 
 

65. Refer to the exhibit.

Which setting must be configured to prevent reuse of passwords?

 
 
 
 

66. A network engineer must deploy a configuration backup policy to the cisco UCS manager. The file generated from this backup must have a snapshot of the entire system that should be used to restore the system during disaster recovery. The backup file must be transferred insecurely by using the TCP protocol.

Which configuration backup settings meet these requirements?

 
 
 
 

67. A network engineer must configure a Fibre Channel port monitoring for the local port. The source port should be monitored in the ingress direction.

Which configuration should be implemented to achieve this objective?

 
 
 
 

68. Which two statements about the process of upgrading an EPLD on a Cisco MDS 9000 series Switch are correct? (Choose two.)

 
 
 
 
 

69. Which action must be performed before renumbering a Cisco UCS chassis?

 
 
 
 

70. An engineer is duplicating an existing Cisco UCS setup at a new site.

What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)

 
 
 
 
 

71. Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose two.)

 
 
 
 
 

72. Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?

 
 
 
 

73. Which virtual MAC address is the default for HSRP version 2 group 10?

 
 
 
 
 
 

74. Which service profile is affected if the default host firmware policy in Cisco UCS Manager is changed?

 
 
 
 

75. An engineer is implementing the Cisco ACI fabric and must create two different vPCs from leaf switches A and B.

The vPCs are deployed as follows:

• vPC 1 encompasses ports Eth 1 /1 on leaf A and B and connects to server 1.

• vPC 2 encompasses port Eth1/2 on leaf A and B and connects to server 2.

A leaf switch profile listing leaves A and B is already configured.

Which ACI object must be created to meet these requirements?

 
 
 
 

76. Refer to the exhibit.

Which action must be taken before the maintenance policy can be committed?

 
 
 
 

77. Refer to the exhibit.

Service degradation is reported on a VM that is deployed on a Cisco UCS blade server.

The traffic from the vNIC is required to SPAN in both directions to a packet analyzer that is connected to UCS-A slot 2 port 12.

Which two commands are needed to complete the configuration? (Choose two.)

 
 
 
 
 

78. Refer to the exhibit.

Which statement about the ERSPAN configuration in this environment is true.

 
 
 
 

79. APIC EPG Resolution Immediacy is set to “Immediate” Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?

 
 
 
 

80. DRAG DROP

An engineer configures the netflow feature on a Cisco NX-OS device. The requirement is to reduce the amount of export data collected by using a sampler.

Drag and drop the netflow configuration steps from the left onto implemented needed to meet these requirements on the right. Not all steps are used.

81. A network architect wants to propose a scalable network monitoring solution in which data is repeatedly acquired from network devices. The solution must use a push model and provide close to realtime access to operational data.

Which technology must be used to meet these requirements?

 
 
 
 

82. Which statement is true about upgrading the firmware on a Cisco MDS storage switch with dual supervisors?

 
 
 
 

83. Which solution provides remote and direct file-level access to users and systems?

 
 
 
 

84. An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode.

The VSAN must meet these requirements:

• Named VSAN must be called "VSAN 10".

• VSAN ID must be 10.

• FCoE ID must be 20.

• VSAN 10 must be attached to port 2 in slot 1.

Which command set configures a VSAN when the fabric interconnect is in Fibre Channel switch mode?

 
 
 
 

85. Refer to the exhibit.

A network engineer plan to upgrade the current software Image of a Cisco nexus switch.

What is the impact of starting the EPLD upgrade?

 
 
 
 

86. A Cisco MDS 9000 series storage Switch has reloaded unexpectedly.

Where does the engineer look for the latest core dump file?

 
 
 
 

87. DRAG DROP

A storage engineer must configure zoning on a Cisco MDS 9000 Series switch.

Drag and drop actions from the left into the order on right

88. Refer to the exhibit.

Which two statements about the routing table of the leaf switch are true? (Choose two.)

 
 
 
 
 

89. DRAG DROP

An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.

Drag and drop the commands on the left to the correct order on the right.

90. What is an advantage of using Ansible for automation as compared to puppet and chef?

 
 
 
 

300-610 DCID Exam Questions - Designing Cisco Data Center Infrastructure (DCID)
Latest 300-435 ENAUTO Exam Questions for CCNP Enterprise and DevNet Professional

Leave a Reply

Your email address will not be published. Required fields are marked *