DES-4121 Free Questions – Specialist – Implementation Engineer, PowerEdge Exam – PassQuestion Free Questions To Test Online

1. A technician needs to install the OS on a server remotely using iDRAC.

What is the minimum iDRAC license required to perform this task?

Express

Enterprise

Basic

Baseboard Management Controller

2. A technician needs to replace a server component with orange tabs/releases.

Which set of paired steps should the technician take to complete this task?

Power off the server Apply anti-static procedures

Remove power cables Cold swap the component

Cold swap the component Apply anti-static procedures

Hot swap the component Apply anti-static procedures

3. A technician creates two virtual disks and assigns a dedicated hot spare to each virtual disk. They also create a global hot spare. A drive fails on the second virtual disk.

What is the result?

Dedicated hot spare for the virtual disk replaces the failed drive.

Global hot spare replaces the failed drive.

Copyback operation occurs between the failed drive and the dedicated hot spare.

Copyback operation occurs between the failed drive and the global hot spare.

4. What can a technician do to ensure that no malicious code can be introduced into any of the servers through physical access?

Set USB 3.0 to disabled

Set Secure Boot Policy to enabled

Set User Accessible Ports to disabled

Set UEFI Variable Acces to disabled

5. A technician is installing a new server and is not getting any link lights on the iDRAC management port. They have verified that the cable and switch port are working.

What could be causing this issue?

iDRAC has an Express license

IP has not been set in the Lifecycle Controller

iDRAC has been disabled in the Lifecycle Controller

iDRAC firmware update is currently in progress

6. A technician receives a repurposed PowerEdge server. After racking and cabling the server, the technician attempts to log into the iDRAC but cannot do so. The default account has been disabled.

What method can be used to enable the default login account?

Run the racadm recresetcommand from the host OS.

Run the racadm recresetcfgcommand from the host OS.

SSH into the iDRAC and run the racadm racresetcfgcommand.

SSH into the iDRAC and run the racadm racresetcommand.

7. A user has a fully configured PowerEdge R640 and an iSM installed on their Windows 2016 operating system. They now want to install OMSA to enable them to have alerts sent out in-Band to a management console.

What does the user need to consider?

OMSA can be installed on the same operating system with ISM, provided both OMSA and iSM have the same firmware version revisions.

iSM must be uninstalled before OMSA is installed.

iSM must be installed before OMSA can be installed.

OMSA can be installed on the same operating system with iSM without restrictions.

8. A technician needs to set a server to always attempt PXE boot before booting to the hard drive.

What actions does the technician need to take to achieve this?

Change the Boot Sequence so the network card is first Remove all boot options except network card

Change the Boot Sequence so the network card is first Disable the boot option for the hard drive

Set the Legacy Boot Protocol for the network card to PXE Change the Boot Sequence so the network card is first

Set the Legacy Boot Protocol for the network card to PXE Select PXE Boot from F11 Boot Manager

9. A server is equipped with 2 CPUs and 12x 8 GB DIMMs, for a total of 96 GB. The OS is not seeing all the memory.

Which memory mode should be configured so that all memory is seen by the OS?

Mirroring

Advanced ECC

Optimizer

Sparing

10. A technician is creating a virtual disk in the DRAC (2x 4 TB NL-SAS in RAID 1) to install Windows 2016. They manually boot to the OS installation media without using the Lifecycle Controller OS Deployment wizard. Only the first 2048 GB on the virtual disk can be partitioned.

How should the technician obtain access to the remaining 2 TB (approximately) of storage?

Delete the 4 TB virtual disk and create a virtual (boot) disk no longer than 2048 GB.

Upgrade to a newer version of the operating system.

Use the lifecycle Controller’s OS Deployment Wizard to deploy the OS on this server.

Use F2 to go into the BIOS, change the BIOS boot mode to UEFI, and try again.

DES-4121 Free Questions – Specialist – Implementation Engineer, PowerEdge Exam

DES-4121 Free Questions – Specialist – Implementation Engineer, PowerEdge Exam

Leave a Reply Cancel reply