[H35-411 Free Questions] H35-411 Huawei Certified Network Professional-GSM

1. What verification is required after the base station upgrade is completed? (Multiple Choice)

Check the running version of the base station

Check the running status of the base station

Make a dial test

Analysis of Traffic statistic

2. Which of the following description is incorrect for the CME tool pattern?

CME has two working modes: integrated and single;

The integration mode is deployed with the M2000;

Stand-alone mode is deployed on a normal PC;

Stand-alone mode can also communicate directly with the network element.

3. What should be paid attention to when accepting products? (Multiple Choice)

Ensure that the system is properly installed, the software and hardware are debugged, and the system can run normally.

The acceptance of the project shall be confirmed by the relevant personnel of both Huawei and the user;

During the acceptance and initial test, both parties should rigorously test against relevant standards.

During the actual acceptance test, the acceptance shall be subject to the contract requirements and the agreement between the parties.

4. When configuring the Gb interface (GboverIP) and the built-in PCU, what should configure for Gb interface to implement IP-based communication between the BSC6900 and the SGSN? (Multiple Choice)

NSE (NetworkServiceEntity)

Local NSVL (NetworkServiceVirtuaILink)

Remote NSVL

PTPBVC（PointtoPointBSSGPVirtuaIConnection）

5. What are the first batch of data information that needs to be obtained after the BSC6900 accident? (Multiple Choice)

Configuration information

Alarm log

Operation log

Traffic statistic Log

GCSR log

6. Which descirption is not correct about board cautions before operation?

It is recommended to keep the mounting materials of the board (such as plastic box, anti-static film bag, etc.) in the equipment room for later use.

Store all boards or parts that have not been installed in a bag with anti-static shielding. It is forbidden to directly package or contact the non-antistatic materials such as white foam, ordinary plastic bags and paper bags.

You can insert the board into the subrack and then ground the entire cabinet.

Keep the anti-static wrist strap in normal working condition

7. What are M2000 alarm status divided into? (Multiple Choice)

Not confirmed not cleared

Confirmed not cleared

Unconfirmed cleared

Confirmed cleared

8. When using different impedance transmission lines between the base station and the BSC, which of the following DIP switches needs to be adjusted?

UEIU、UELP

UELP、GTMU

UPEU、UEIU

GTMU、GATM

9. Which devices are IMSI information mainly stored in the GSM system? (Multiple Choice)

SIM card

MSC

VLR

HLR

10. Is the operation procedure for replacing DFUc and DPUd consistent?

TRUE

FALSE

Leave a Reply Cancel reply