HPE6-A70 Free Questions – Aruba Certified Mobility Associate Exam V8.02 – PassQuestion Free Questions To Test Online

1. A network administrator creates the role employees and adds this rule to it:

user any any permit

The first several wireless clients assigned to the employees role are assigned IP addresses in the 10.10.10.0/24 subnet. Several other wireless clients with the employees role are then assigned IP addresses in the 10.10.20.0/24.

When the Aruba firewall matches traffic from these clients to the user any any permit rule, what does it do?

It permits traffic from wireless clients in both the 10.10.10.0/24 and 10.10.20.0/24 subnet as long as the packet has a source I

It permits the traffic from wireless clients in the 10.10.20.0/24 subnet, but drops the traffic from wireless clients in the 10.10.10.0/24 subnet.

It drops traffic from wireless clients in both the 10.10.10.0/24 and 10.10.20.0/24 subnet.

It permits the traffic from wireless clients in the 10.10.10.0/24 subnet, but drops the traffic from wireless clients in the 10.10.20.0/24 subnet.

2. A company has many 7220 controllers in its Aruba wireless architecture. A network administrator wants to use the Traffic Analysis dashboard in order to monitor which type of applications are being used by wireless users.

What is required for this implementation?

AirMatch and ClientMatch must be enabled.

The solution must have active PEFNG licenses.

WLANs must use the decrypt-tunnel forwarding option.

Firewall policies must include application filtering rules.

3. A network administrator configures an Aruba Mobility Master (MM)-based solution to provide wireless access to employees.

The solution must meet these criteria:

– Authenticate users to a network RADIUS server

– Enforce different Aruba firewall rules based on the user department

How can the administrator meet these criteria in the simplest way?

Create a different WLAN and SSID for each department. Apply different firewall policies to each WLA

Have the RADIUS server send different roles for users in different departments. Apply role-based firewall policies.

Create multiple zones on the M

Assign different departments are sets of firewall policies to different zones.

Have the RADIUS server assign users in different departments to different VLANs. Apply firewall policies based on IP ranges.

4. Users to which this policy apply are unable to receive IP addresses with DHCP.

How should the administrator fix the issue?

Move the user any svc-dhcp permitrule to the bottom of the list.

Remove the deny rule from the policy.

Use the correct service alias in the user any svc-dhcp permitrule.

Change user to any in the user any svc-dhcp permitrule.

5. An Aruba solution runs ArubaOS 8 and uses a mobility master architecture.

Which feature can network administrators use to balance wireless across APs on different channels?

AppRF

ARM

Client Match

AirMatch

6. What is the difference between how a network administrator can monitor clients in the Mobility (MM) interface and in the AirWave Management Platform?

AirWave shows trends for the past several minutes, while MM shows longer trends.

AirWave combines information from more sources, such as RADIUS authenticating servers and APs.

AirWave shows the current signal level for the client connection, while MM does not show RF statistics.

MM shows user and role information associated with clients, while AirWave does not.

7. An AP operates on channel 6.

Which device causes the most significant and consistent interference with the signal?

cellular phone

AP operating on channel 11

wireless security camera operating on channel 8

weather radar

8. What is a reason for a company to choose to deploy an Aruba 7024 Mobility Controller (MC) rather than an Aruba 7010 MC?

to support a faster firewall throughput rate

to support 802.11ac APs rather than only 802.11n APs

to support more wireless users

to support more POE devices directly connected to the MC

9. Refer to the exhibit.

The exhibit shows output from a Mobility Master (MM) dashboard.

What is a valid reason for the administrator to click the akamai square under applications?

to see the break down for only the roles, destinations, WLANs, and devices that use this application

to download a report about the usage of this application over time

to create filter rules in order to control wireless user access to this application

to set up bandwidth rule in order to control wireless user access to this application

10. A company has an Aruba solution that supports an employee WLAN.

How can network administrators control in which subnets user receive IP addresses?

Assign switch ports connected to APs to VLANs associated with the desired subnets.

Set the VLANs associated with desired subnets in the WLAN settings.

Configure firewall policies that permit the desired subnet, and add them to the initial role for the WLA

In the WLAN settings, configure User role rules with the desired subnet addresses as match criteria.

HPE6-A70 Free Questions – Aruba Certified Mobility Associate Exam V8.02

HPE6-A70 Free Questions – Aruba Certified Mobility Associate Exam V8.02

Leave a Reply Cancel reply