Juniper JNCDS-DC JN0-1301 Free Questions – New Data Center Design, Specialist Exam – PassQuestion Free Questions To Test Online

1. You plan to deploy a set of SRX Series devices in an active/passive chassis cluster with an active/active network infrastructure. Which two statements are true in this scenario? (Choose two.)

This deployment scenario is recommended when firewall services are used extensively for north-south traffic.

This deployment scenario is recommended when firewall services are used extensively for east-west traffic.

End-host traffic is serviced through one SRX node during non-failure conditions.

End-host traffic is serviced through both SRX nodes during non-failure conditions.

2. You are designing an IP fabric using EVPN with VXLAN and must ensure that all links between the leaf and spine nodes are used as efficiently as possible. Which two design considerations are important to achieve this task? (Choose two.)

Load balancing is automatic in an IP fabric design.

Load balancing must be managed by an SDN controller in an IP fabric design.

The overlay network needs to support load balancing.

The underlay network needs to support load balancing.

3. You are designing a Control-based SDN overlay network. IP filtering and tenant separation for Layer 3 and Layer 4 traffic is required for this installation. In this scenario, which Contrail component performs this function?

vSwitch

control node

vRouter

compute node

4. You are implementing traffic prioritization in your IP fabric. You must ensure that traffic is handled correctly throughput the fabric. In this scenario, which statement is correct?

You should implement a BA classifier on all egress interfaces on the leaf devices.

Rewrite rules must be applied on the spine devices for all leaf-facing interfaces.

You should implement a BA classifier on all egress interfaces on the spine devices.

Schedulers should be applied to all egress interfaces on your leaf and spine devices.

5. You want to provide Layer 2 connectivity to a backup data center or to a disaster recovery site. What would you use to accomplish this task?

Data Center Interconnect

network redundancy

SDN

SAN protocols

6. You are creating a design proposal and deciding whether to use 10 GbE copper or 10GbE fiber cabling to connect your ToR switches to the servers. Which statement is correct regarding this scenario?

Fiber has a lower power consumption on a per-port basis.

Copper cabling requires special transceivers for different speeds.

Fiber is much cheaper to purchase but has a higher long-term cost.

Copper will allow you to reach the greatest distance between devices.

7. What are two Layer 2 traffic tunneling schemes that are supported in a Juniper Networks IP fabric? (Choose two.)

EVPN

MPLSoGRE

GENEVE

VXLAN

8. A customer has selected QFX5110 switches. The initial installation will contain two switches located in racks about two meters apart. What is the most cost-effective way to interconnect these switches?

Use SMF between the racks and interconnect the switches with LX4 transceivers.

Use a Virtual Chassis cable between the VCP cards.

Use MMF between the racks and interconnect the switches with SR4 transceivers.

Use a three-meter passive DAC cable between the racks and interconnect the switches with it.

9. Which two statements are true about IP fabrics? (Choose two.)

IP-based applications do not require an overlay network to maintain connectivity.

Applications that require security needs an overlay to provide the security.

Applications that require Layer 2 adjacencies require an overlay network to maintain connectivity.

IP fabrics can natively support both Layer 2 and Layer 3 applications.

10. Clos architectures are based on which network topology?

ring

VLANs

hybrid

spine and leaf

Juniper JNCDS-DC JN0-1301 Free Questions – New Data Center Design, Specialist Exam

Juniper JNCDS-DC JN0-1301 Free Questions – New Data Center Design, Specialist Exam

Leave a Reply Cancel reply