NACE-CIP2-001 Free Questions – Coating Inspector Level 2

1. You are the NACE Coating Inspector on a tank lining project and are asked to perform a high voltage holiday test after the coating applicators have completed their final repairs. After meeting all the confined space entry permit you enter the tank and notice a very strong odor of solvent.

Your first course of action should to:

2. You are working as an inspector in a galvanizing plant for the first time.

What are some of the hazards you need to be aware of:

3. You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3^rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.

Your FIRST preferred course of action is to:

4. An Inspection and Test Plan is required when:

5. The Inspectors’ goal at the Pre-Job Conference is to:

6. Coating Surveys are legally required:

7. Individuals conducting Coating Surveys should:

8. The cost of qualified Coating Inspection is normally offset by:

9. You are a NACE Level 2 Coating Inspector who has just arrived on a job in progress where there is no Inspection and Test Plan (ITP). The first morning you arrive the job is behind schedule and you are asked to take DIY Film Thickness readings.

Your FIRST preferred course of action is to:

10. When conducting inspections the Inspector should follow which standards: