[Update] Free CCNP Collaboration 350-801 Practice Exam Questions and Answers

If you’re afraid about passing the Implementing and Operating Cisco Collaboration Core Technologies (350-801 CLCOR) test because you’re not prepared, you don’t have to worry about it anymore. PassQuestion has compiled a comprehensive collection of Cisco 350-801 exam questions and answers to guide you through 350-801 dumps Questions Answers for your Cisco CCNP Collaboration Exam preparation.

PassQuestion provides free online Cisco 350-801 test practice questions. You can use the practice test to evaluate yourself before purchasing our entire set of dumps.

1. When configuring Cisco Unified Communications Manager, which configuration enables phones to automatically register to a Cisco Unified Communications publisher when the connection to the subscriber is lost?

Cisco Unified CM Group

Device Pool

SRST

Route Group

2. Regarding SIP integrations with Cisco Unified Communications Manager, if the Cisco Unity Connection is configured to listen for incoming IPv4 and IPv6 traffic, how should the addressing mode be set up in the Cisco Unity Connection?

Set up media ports for each port group to use IPv4.

Set up for each group to use IPv4 and IPv6.

Set up IPv4 and IPv6 in cisco Unified CM.

Set up is not required.

3. An administrator must configure the local route group feature on cisco UCM.

Which step will enable this feature?

For each route list configure a route group to use as a Local Route Group.

For each route pattern, select the Local Route Group as the destination.

For each route group, check the box for the Local Route Group feature.

For each device pool. configure a route group to use as a Local Route Group for that device pool

4. A customer is deploying a SIP IOS gateway for a customer who requires that in-band DTMF relay is first priority and out-of-band DTMF relay is second priority.

Which IOS entry sets the required priority?

dtmf-relay cisco-rtp

sip-notify dtmf-relay rtp-nte

dtmf-relay rtp-nte sip-notify

dtmf-relay sip-kmpl cisco-rtp

5. Which Cisco Collaboration Edge architecture product allows remote endpoints to leverage corporate on-premises Cisco Unified Communications infrastructure?

Cisco Webex

Cisco VPN Client

Cisco Unified Communications Mobile and Remote Access

Cisco Umbrella

6. Refer to the Exhibit.

Which command is required to allow this media resource to handle Video Media streams?

maximum sessions hardware 50

video codec h264

codec pass-through

associate application Cisco Unified Border Element

7. How does an administrator make Cisco IP phone display the last 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?

Configure a calling party transformation pattern that keeps only last 10 digits.

Configure a translation pattern that has a calling Party Transform Mask of XXXXXXXXXX.

On the inbound SIP trunk, change Significant Digits to 10.

Change the service parameter Apply Transformations On Remote Number to True.

8. Due to service provider restriction, Cisco Unified Communications Manager cannot send video in the SDP.

Which two options on Cisco Unified CM are configured to suppress video in the SDP is outgoing invites? (Choose two.)

Check the Send send-receive SDP in mid-call INVITE check box on the SIP trunk SIP profile.

Add the audio forced command to voice service voip on the Unified Border Elements.

Check the Retry Call as Audio on the SIP trunk

Set Video bandwidth in the Region settings to 0.

Change the Video Capabilities dropdown on the endpoint to Disabled.

9. What is the function of the Cisco Unity Connection Call Handler?

routes calls to a user based on caller input

queues calls

searches a list of extensions until the call is answered

allows customized scripts for IVR capabilities

10. An engineer configures Cisco Unified Communications Manager to prevent toll fraud.

At which two point does the engineer block the pattern in Cisco Unified CM to complete this task? (Choose two.)

route pattern

translation pattern

route group

partition

CSS

11. What dialed number match this cisco UCM route pattern?

1[23]XX

1200 through 1399 only

1230 through 1239 only

12300 through 12399 only

1200 through 1300 only

12. Which type of greeting in the Call Handler configuration in Cisco Unity Connection overtimes all other greetings?

holidays

supervisory

alternate

priority

13. A customer wants to deploy Cisco Jabber Phone Mode with contacts.

Which two configurations are needed to accomplish this goal? (Choose two)

Add the Application Client Users role to the Cisco UCM end users.

Remove the IM and Presence servers from the Cisco UCM service profile.

Disable Instant Messaging on IM and Presence.

Import Contacts.xml into Jabber.

Enable Cisco UCM end-users for IM and Presence.

14. Which call flow matches traffic from a Mobile and Remote Access registered endpoint to central call control?

Endpoint > Expressway-C > Cisco unified CM

Endpoint > Expressway-E > Cisco Unified CM

Endpoint > Expressway-C > Expressway-E > Cisco Unified CM

Endpoint > Expressway-E > Expressway-C > Cisco Unified CM

15. How does Cisco Unified Communications Manager perform a digit analysis on-hook versus off-hook for an outbound call from a Cisco IP phone that is registered to Cisco Unified CM?

On-hook, by pressing the digits and entering “#” to process the call, Unified CM performs a digit-by-digit analysis; off-hook, Unified CM analyses all digits as a string.

On-hook, unified CM performs a digit-by-digit analysis; off-hook, Unified CM considers all digit were dialed and dos not wait for additional digits.

On-hook, no digit analysis is performed; off-hook, Unified CM requires the “#” to start the digit analysis.

On-hook, Unified CM considers all digits were dialed and does not wait for additional digits; off-hook, Unified CM performs a digit-by-digit analysis.

16. Multiple route patterns match a number.

How does Cisco Unified Communications Manager determine which pattern to use?

the one that discards everything PreDot

the one with the longest match

the one that comes first in numerical order

the one with the closed match

17. Refer to the exhibit.

An administrator must fix the SRV records to ensure that server 1 .sample.com is always contacted first from the three servers.

Which solution should the engineer apply to resolve this issue?

Priority = 100. Weight = 90

Priority = 5. Weight = 70

Priority = 10, Weight = 5

Priority = 10. Weight =10

18. Which two conditions must a user meet to provision a new device using the self-provisioning feature? (Choose two.)

The user must have the appropriate universal device template linked to the linked to the user profile.

The user must have at least one user device profile assigned.

The user must have a primary extension.

At least DNs must be assigned to the user device.

The user must be part of “standard CCM Super User”.

19. An administrator is in the process of moving cisco unity connection mailboxes between mailbox stores the administrator notices that some mailboxes have active message waiting indicators what happens to these mailboxes when they are moved?

The move will fall If MWI status Is active.

Moving the mailboxes from one store to another falls If MWI Is turned on.

If source and target mailbox store are not disabled. MWI status is not retained.

The MWI status is retained after a mailbox is moved from one store to another.

20. Which action is required if an engineer wants to have Cisco Unified Communications Manager configuration for an MGCP gateway?

Upload the custom configuration in the TFTP server in cisco Unified CM.

Configure the Cisco Unified CM’s IP in voice service VoIP.

Apply the ccm-manager configuration commands to the gateway.

From Cisco Unified CM >Device > Gateway > Add gateway, check the auto-configuration check box.

[Update] Free CCNP Collaboration 350-801 Practice Exam Questions and Answers

Leave a Reply Cancel reply